This is 3d modeling Urdu/Hindi lesson for 3d modeling and 3d Human Head character setup in 3d modeling and animation software Maya 2011. In this 3d modeling lesson you will learn how to setup character of the 3d human face in Maya polygon 3d modeling way. You will learn that how a cube is model to make 3d human face in 3d modeling and animation software Maya. You would have this in cartoon, 3d animated films and 3d video games but this time we give you free opportunity to learn this skill of 3d modeling in your own Language Urdu/Hindi and this series is also released in English as well. In this 3d modeling series you will be well aware with 3d polygonal modeling for character set in 3d modeling and animation software Maya but you have to keep patience and pace with the lesson so that you could learn all tips and techniques of the 3d modeling character setup with reference images in 3d modeling and animation software Maya.

Steps:

In the last part you learn how to bring and arrange our reference images in workspace now we shall model 3d human face.

Create 3d polygon Cube, using scale tool scale it bigger so that its outer edges are exactly as spread as the face size.

Then in the channel box (ctrl +A for channel box) in Shapes > Inputs put values of all Subdivision attributes as 2. This will divide your cube into two parts of each side.

Now right click and go to face mode select the half face of the cube and hit delete from the key board then click on the Duplicate special option box in the Edit menu and then mark the Instance option and put value of ‘–1’ in scale x box there click on apply and you will see the duplicated copy of your half cube at the same position where you deleted this and now you have to setup character of half side and other half side will be symmetrically modeled with this technique.

Now open the Shading menu of the perspective menus and click on ‘X-ray’ mode. Right click and select edge option using move tool, move the edges so that they fit in the geometry of the orthographic images which you can see in x-ray mode.

For specifying nose area and lips area model you have to create mode edge loop which horizontally divide 3d model you are modeling for 3d human character, go to Edit Mesh menu and click on Insert Edge Loop Tool. Create four edge loops and move one loop above the eyebrow, second under the eye, third slightly above the nose tip and fourth between lips.

For mode detail in Urdu/Hindi watch this free 3d modeling and character setup lesson now.

Here we teach you Character Modeling in Autodesk Maya 2011 with new series of free video tutorials. These 3d modeling and character setup tutorials are in Urdu/Hindi Language. you can learn Autodesk Maya 2011 in Urdu/Hindi comprehensively covering all the tips and techniques of 3d character setup in 3d modeling animation and rendering software Autodesk Maya 2011. 3d modeling involves 3d character setup, 3d texturing, shading, UV mapping normal mapping and coloring etc. in these Learning 3d Modeling and Character Setup in Maya 2011 videos series you will learn how to setup 3d Human head character in 3d modeling animation software Autodesk Maya 2011. we shall use the expert level technique of 3d modeling which the expert 3d modeler use when they create 3d model in 3d computer graphics software applications. First of all we shall import reference image of the 3d human head character then according to these orthographic images we shall model human head in 3d modeling animation software Maya. But make sure that you should have already orthographic image of front and side view of Human face even you own image can be used or you can download from Google.

Modeling Steps:

1. Create a polygon plane in 3d modeling and animation software Maya 2011, using rotate tool rotate this plane on x-axis using red manipulating handle or put value of 90 in rotate-x in the channel box (press ctrl + A once for opening channel box).

2. Hit 5 for shaded mode, the right click on plane and select ‘assign favorite material’ select ‘Lambert’ then in the attribute editor click on option box in front of color option, choose ‘File’ and then browse for the 2d image of front side of the human face. Hit 6 key to see the results.

3. Then duplicate this plane by pressing ctrl + d, rotate the duplicated plane on y-axis or put value of 90 in rotate-y option of the attribute editor.

4. Again right click on the plane and select assign favorite material and select the color option box then click on File icon and this time browse for the side view image of the face. Hit 6 to see the result. Now using move tool you have to move these two orthographic images at right place so that when you are in side view you can see side pose of the face and when you are in front view you can see front pose.

5. For more details of this lesson watch this free 3d modeling tutorial video now and then move on to next step.

In this video tutorial lesson you will learn about the NURBS modeling. For this purpose first of all open NURBS primitives from the menu tool. NURBS modeling using NURBS primitives are totally different and a separate term as the polygon modeling using polygon primitives. NURBS surfaces are the parametric surfaces and they are different from the polygon surfaces. NURBS stands for non-uniform rational basic spline. This involves the modeling of curved surfaces which offer great flexion. Watch this free video tutorial to learn more about the NURBS modeling. For more knowledge about Autodesk Maya remain in contact with our website.

In this lesson you will be teach a new technique of 3D. it is helpful for basic maya learners . I hope you will appreciate this tutorial. In this tutorial we make a nice shiny rifle bullet.

First, we are going to make the bullet strike. Create a spline that resembles the one on the image.

Apply the Lathe modifier to the spline and put the segments number to 16. If you don’t find the object like on the picture, struggle clicking on the Min/Center/Max buttons in the Lathe modifier properties until you obtain it.

Put in the MeshSmooth modifier to the object plus put the iterations number to 2.

Then, we’ll make the bullet casing, so generate a spline like is exposed in the next picture.

Similar to with the slug, apply the Lather modifier through 16 segments to the casing spline.

Insert the Edit Poly modifier and go into the Edge selection mode. choose the edges (shown in red in the picture) and chamfer them a small bit.

This tutorial is helpful for maya basic learners.3D maya softwear is latest softwear in 3D .Here I will demonstrate you a way to create a realistic looking light bulb to be used in any sight. I think you will learn very much about maya basics through this tutorial.

1.Create easy line like this below.

2. Than pick these vartex.

3. Right tick on one of them, and select smooth alternative.

4. When that is complete chose Lathe from modifier list and make sure Flip Normals and Weld Core, set segments to 40.

For just an introduction of the Autodesk Maya I would say Autodesk Maya is a 3d Animating Software but it is not so much short indeed. Maya is the world of Imagination and you can design your models animate them and make movies of your animation and much more things to tell. This tutorial is particularly for the introduction of Nurbs modeling in which you will learn that how you can design the curved surfaces by yourself according to your customization and demand of the design. Like the polygon modeling Nurbs modeling is a complete term of the Maya it has its own command and tools in Maya.

If you are the beginners in the field of the Autodesk Maya then you need to know the basics of the Autodesk Maya. Here is the website which is going to be the very useful source of the knowledge for you all you need to show is attitude of learning. Maya is the 3D animation software where you can design you 3D characters, 3D models and create the 3D animations.
Here is all about Nurbs 3D modeling basic. Nurbs 3D modeling is the 3D modeling of the curve surfaces. It is different from the 3D polygon modeling. Watch this tutorial for learning the Nurbs Modeling.

It is the first lesson of the graphics about the 2D coordinates. Actually the 2D plane is the plane with some breadth t and length but it does not have height. For example a surface of paper or the blackboard is 2D surface. Now these two dimensional surfaces have two direction in the graphical representation the two directions or the dimension are referred as the coordinates called as XY coordinate. And form a system called as the XY coordinate system in terms of Maya they are also called as UV coordinates. There is an x-axis showing horizontal direction and y-axis showing the vertical direction. They both are perpendicular to each other and the point of their intersection is called as origin represented by ‘o’. The two axes extend in both directions positive and negative. You can learn much more about the 2D plane/coordinates here on this website.

This tutorial is the 1st part of the two parts video tutorial lesson in which you will learn about the poly editing tools in the Autodesk Maya. This is a complete lesson on the poly editing tools which covers all the basic and important knowledge about the polygon editing tools. For the complete comprehension you need to practice by your self what you will learn here in this tutorial video lesson. Maya not only provides you the basic polygon formation tools but also it gives you tools and commands for modifying the basic polygons called as the poly editing tools in Maya.

In this tutorial video you will learn what are the poly editing tools and how can you use them? The poly editing tool by its name gives an idea that it is related to the editing of the polygon. You can edit a simple polygon shape and turn it out into a new modified shape of your own choice. You can learn here how to use this tool in a very simple way of teaching but an excellent way of comprehension. You can learn all the Maya basics and expert level knowledge on this website by watching free video tutorials on Autodesk Maya.