The post 3D Woman Model appeared first on Free Maya Video Tutorials.

In this tutorial we shall learn how to use selection mask remaining in Maya 2012 . First of all find out selection mask file and open it in Maya. You are seeing in this scene that the current model given in this tutorial is created with the help of different object setup. Here in this project NURBs primitives, polygonal primitives are together used along with lighting affects and some particle affects. The scene is already created and when we play the animation, the scene creates such situation as shown in this video. When we use selection mask, more options appear on the shelf menu. The object setup in this scene is still little bit confusing, so instead of editing we can use selection tool for separate setting of each torus. At this time you can’t select the particle affects in the scene.
They can only be managed or edit from selection mask. In this scene we can not disable my surface selection but polygonal selection can be managed from here.
There are more options given in the drop down list of this selection mask which allows you to enable or disable the selection. If we right click on the given model, there appear lots of options for object modification on left and right sides separately. We can manage the scene from these options. Watch this video tutorial holding selection mask setup, so get help from this video tutorial.

The post Selection Masks in Maya 2012 appeared first on Free Maya Video Tutorials.

Here you will learn about character rigging in Maya 2012 with some advanced features. The character basic skeleton is created with the help of joints set up. The model is in standing position with stretching arms. The model is now in wireframe mode. The character is rigging from joint set up. There are main joints at wrist, elbow, shoulder point and these joints are used for moving, rotating and stretching the arms for performing any action. It is better to use outliner; it allows you to modify the shape of the model along with joints. Here this tutorial is describing some information about wrist joints and from outliner setup; you can manage the setting for each joint separately.
From shoulder joints the character can be rotated for any kind of job. The chest joint is so elastic that it can be easily rotated for any kind of situation. The same is the case with leg joint set up where you can rotate the leg using rotate tool.
Make sure that other leg is also performing same job by rotating at X-axis. The joint set up is really amazing and it is not necessary that all joint set up should be same; the joints are created according to different character shape. Anyhow the following video is only showing you set up for model rigging in Maya 2012.

The post Advanced Maya 2012 Rigging appeared first on Free Maya Video Tutorials.

In this video tutorial you will learn about transparency and refraction. The refraction is a term which belongs to lighting application. The refraction is just like a curve having transparent material. The refraction is produced by clear crystal and transparent material for example, crystal glass full of water demonstrated the refraction and the assigned liquid expresses the water because of applied material setting. In attribute editor, here you can see the material shape after every assigning material. First of all don’t forget to rename the model because it is bit necessary for any modeling process. In the bottom side, there are plenty of options having different tasks. The character model or simple model can be modified after changing attribute value and ratio here in this section.
The color, lighting, shading and other requirements of the model are managed here quite easily. Use transparency level as white because only in this way you can represent the refraction and transparency concept.
That’s why the model is secular high-lighted. The refraction options are located in the below section of attribute editor where it deals with refraction setting of given model. Few changes here in this section will create busy result in model rendering image. Further setting will be made from hypershade which is also described in given video tutorial.

The post Maya 2012 Tutorial – Transparency and Refractions appeared first on Free Maya Video Tutorials.

In this tutorial I demonstrate how you can model a high polygon tire stride in Maya… from poly modeling in excess of a simple UV layout and .lastly taking a bump map to put it on the tire. polygon modeling is very interested way of 3D. This tutorial is very helpful for maya beginners .
If you have any troubles just visit our website freemayavideotutorials.com

The post How To Make A Tire Tread Model In Maya appeared first on Free Maya Video Tutorials.

This video tutorial will educate you how to model a 3d volleyball with polygons in Maya. following this tutorial you will be clever to Model general 3d objects with polygons. This tutorial is very helpful for 3D Maya learner .it is very easy and interested way of 3d maya. polygons modeling is basic lesson in 3d maya. I think this tutorial fully helpful in polygons modeling.

The post How To Make A Volleyball Model With Polygons In Maya appeared first on Free Maya Video Tutorials.

From side to side the course of the sequence I’ll try to give details how to model different air, sea and land military vehicles. Also, I’ll give details how to use dissimilar modeling techniques to get more realistic consequences. In this tutorial we’ll focus on the Imperial Japanese Navy Air Service carrier-based combatant aircraft, Mitsubishi A6M2, also recognized as Zero.

Setting The Scene
Before we start the real modeling process, we require to set up orientation pictures in the viewports.
Note: Scene with by now set up reference planes is situated in the Part1.zip file.
So, generate 3 planes, in their matching viewports that have the scope of the reference pictures (height and width segments should be set to 1). Also go them so they are positioned similar to in the perspective view.

Select all 3 planes, right click and select Properties. In General tab, make sure Freeze and uncheck Show Frozen in Gray. Click OK to save the settings. By responsibility this, we don’t have to be anxious that we’ll by chance select and/or move the orientation planes.

At the present we are prepare to start.

Modeling

Make a cylinder (12 sides, 5 height segments) in the front viewport.

Go to Object Properties and change the Visibility to 0.75. at the present we can see the orientation pictures behind the model.

The post How To Make A Mitsubishi a6m2 Zero Model In Maya appeared first on Free Maya Video Tutorials.

Initial go to create/CV curve tool.

Next just click to make points. Make easy profile for rocket. If you make a error just press delete and the point will be deleted. When you finish push enter.

Thus you shall get something like this

After that choose that curve and go to Surface/revolve option box

In options window set it to rotate around Z axis

Thus you got easy rocket geometry

The post How To Make A Rocket Model with Particle Trail appeared first on Free Maya Video Tutorials.

Ever required to know more about how the models were shaped .In behind this CG product that parades over ‘dolls’ as their ware, I wanted to find out about the genesis of these mannequins. I talked to the team of designers, engineers and artists Productions in Utah who took me through the process from the ground up.

Data gaining
Allan Renfeldt, the Content manufacture Manager at took me through the process. “The research starts with a human figure,” he begins. “We scan and get ready any number of human figures, from which we gather an standard. We have a Cyber wear full body scanner that uses laser range-finder scanners from four towers that scans our subject matter. Over two million polys are derivative over about 17 seconds. The last consequence is built so as to very intimately match the model we required to location.

Allan Renfeldt: It’s approximately a split pipeline in the start. We’ll have a modeler start from scrape with just photographic orientation. They would create a high decree model in the shape of a widespread human being. Called a ‘unimesh’ since this mesh can morph into many dissimilar human shapes, be that male or female adult, fat, thin, young, old or zombie. That process is self-governing of the scan data gaining that is used in a dissimilar part of the pipeline. We’ve had models out here to be scanned and we then in use the ‘idealized mesh’. We then take the modeled unimesh, to the Cyberwear scanned body shape.

Unimesh
We have under attack landmarks on the mesh that are coordinated to where, say, the eyes land on the countenance. Also, elbows, nipples, kneecaps all lined up on the enmesh, so that it becomes a model of the being we want it to become.

The reason and goals of rising a Unimesh for the DAZ models “a little bit only,” says Blain Fernery. “Melding the unimesh with the scan data of a exact person is a key to our product. It is the base for a number of manufactured goods lines from DAZ.”

“The Unimesh is a work-in-progress and has been ever since the third age group,” says Allan Renfeldt. “The third age group male and female (Michael and Victoria) were slash from the same mesh, but they were not identical.” That task has been the scheme behind the growth of the latest unimesh at DAZ, and now nature forms can be keyed as the crow flies up out of DAZ 4.0, stretching from small female, all the way through to large body-building males, at dissimilar ages from kids through to old.

The post How to Create A Model In Maya appeared first on Free Maya Video Tutorials.

thought it would be well modeling practice for me and a best start before I model my own version of a house elf.

I bigining off with a one polygon then extrude from that. Many people have lots of different ways of making a start on there models, some people usually start with a box then shape it and slowly add more and more detail. I sometimes model like that but for this I will be working in my extruding method, so sorry if its not to helpful but when I know what I’m going to creat I find it a bit faster.

The post How To Make A Model of Kreacher appeared first on Free Maya Video Tutorials.